Hawking Technology HWU54D - Manual (Page 17)

Parameter Description
Authentication Mode
This setting must be consistent with the wireless networks
that the adapter intends to connect with.
Open System – No authentication is required
Shared Key – Only wireless stations using a shared key
(WEP Key identified) are allowed to connect with each other.
Auto – Auto switch the authentication algorithm depending
on the wireless networks that the adapter is connecting to.
WEP Encryption Key Setting Click this button to setup the WEP key. Please refer to
Section 3.3 for details.
WPA Encryption Setting Click this button to setup the WPA function. Please refer
to Section 3.3 for details.
Profile
Profile Name
You can save the current network settings as a profile. To
connect to the network without making additional
configuration, you can load the profile at a later time.
Load Load the setting values from the file in the “Profile Name“ list.
The new settings will be activated immediately.
Save Current Input a file name and click “Save Current“ to write the current
setting values to be a profile in the “Profile Name“ list.
Delete Delete the profile you selected.
Other
Advanced
Setting...
For more advanced setting, please click it. To know more of
the setting, please refer to Section 3.4.
Information To view the version of the driver, firmware and the MAC
Address of the adapter, click this button.
17