Hawking Technology HWU54D - Manual (Page 14)

Parameter Description
Mode
Station – Set the USB adapter as a wireless client.
Access Point – Allows the USB adapter to function as a
wireless AP. Please refer to Section 3.5 for the AP settings.
Network Adapter Displays the product information of the USB Adapter.
Available Network Display all the SSID and Signal Strength of wireless stations
nearby. To re-survey the available wireless devices please
click “Refresh”.
There are two ways to automatically make a connection
between the USB Adapter and a wireless station on the list.
1. Double-click the wireless station on the list directly.
2. Select the station you intend to connect to and then
click “Connect this site“.
Current Network Information Display the information about the wireless network this
adapter is connecting to. The information includes Channel,
Type, SSID, TX Rate and Encryption settings. Note: Please
refer to Section 3.2 for the description of each item.
More Setting For setting more functions including disable/enable WEP
and Power Saving Mode, etc. Please refer to Section
3.2, 3.3 and 3.4.
Link Status Displays the status of the wireless connection.
14