HP ze4200 - Manual (Page 73)

Component Removal Procedure Additional Steps
Guide, HDD Keyboard cover
(page 2-10).
Speaker (page 2-12).
Switchboard PCA
(page 2-13).
Keyboard (page 2-13).
CD/DVD (page 2-16).
Display (page 2-17).
Top case (page 2-20).
When replacing the HDD guide, make sure you only
replace the two right screws. Do not replace the two left
screws.
Heatsink (with fan) See page 2-26.
Keyboard See page 2-13.
Panel, wireless Keyboard cover
(page 2-10).
Speaker (page 2-12).
Switchboard PCA
(page 2-13).
Keyboard (page 2-13).
CD/DVD (page 2-16).
Display (page 2-17).
Top case (page 2-20).
Press the tabs on both sides of the panel and then lift it
from the bottom case.
PCA, I/R See page 2-24.
PCA, left and right
antennas (wireless
models only) Keyboard cover
(page 2-10).
Speaker (page 2-12).
Switchboard PCA
(page 2-13).
Keyboard (page 2-13).
CD/DVD (page 2-16).
Display (page 2-17).
Top case (page 2-20).
Heatsink (page 2-26).
Floppy (page 2-22).
Motherboard (page 2-30)
Bottom case (page 2-34).
Disconnect the front antenna PCA cables from the
mini-PCI card (page 2-6).
Be careful not to bend the metal tabs on the bottom
case when removing or replacing either of the two
antenna PCAs.
PCA, motherboard See page 2-30.
PCA, switchboard See page 2-13.
Socket, PCMCIA Keyboard cover
(page 2-10).
Keyboard (page 2-13).
CD/DVD (page 2-16).
Display (page 2-17).
Top case (page 2-20).
Heatsink (page 2-26).
Floppy (page 2-22).
Motherboard (page 2-30).
1. Remove the two screws attaching the socket to the
motherboard.
2. Unplug the PCMCIA socket from the motherboard.
Speaker assembly See page 2-12.
Service Manual Removal and Replacement 2-39