HONDA GCV190 - Manual (Page 11)

11
ENGLISH
Air Index
An Air Index Information hang tag/label is applied to engines certified
to an emission durability time period in accordance with the
requirements of the California Air Resources Board.
The bar graph is intended to provide you, our customer, the ability to
compare the emissions performance of available engines. The lower
the Air Index, the less pollution.
The durability description is intended to provide you with information
relating the engine’s emission durability period. The descriptive term
indicates the useful life period for the engine’s emission control
system. See your EMISSION CONTROL SYSTEM WARRANTY
(page 14) for additional information.
The Air Index Information hang tag/label must remain on the engine
until it is sold. Remove the hang tag before operating the engine.
Specifications
GCV160
GCV190
Tuneup
Quick Reference Information
Descriptive Term Applicable to Emission
Durability Period
Moderate 50 hours (0–80 cc inclusive)
125 hours (greater than 80 cc)
Intermediate 125 hours (0–80 cc inclusive)
250 hours (greater than 80 cc)
Extended 300 hours (0–80 cc inclusive)
500 hours (greater than 80 cc)
1000 hours (225 cc and greater)
Length x Width x Height
(without electric start)
367 x 331 x 360 mm
(14.4 x 13.0 x 14.2 in)
Length x Width x Height
(with electric start)
367 x 354 x 360 mm
(14.4 x 13.9 x 14.2 in)
Dry weight (without electric start) 9.8 kg (22 lb)
Dry weight (with electric start) 11.6 kg (26 lb)
Engine type 4-stroke, overhead cam, single cylinder
Displacement
[Bore x Stroke] 161 cm 3 (9.8 cu in)
[64 x 50 mm (2.5 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.3 kW (4.4 hp) at 3,600 rpm
Max. net torque
(in accordance with SAE J1349) 9.4 N•m (6.9 ft-lb) at 2,500 rpm
Fuel tank capacity 0.93  (0.25 gal)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
Length x Width x Height 367 x 331 x 368 mm
(14.4 x 13.0 x 14.5 in)
Dry weight 12.3 kg (27.1 lb)
Engine type 4-stroke, overhead cam, single
cylinder
Displacement
[Bore x Stroke] 187 cm 3 (11.4 cu in)
[69 x 50 mm (2.7 x 2.0 in)]
Net power *
(in accordance with SAE J1349) 3.8 kW (5.1 hp) at 3,600 rpm
Max. net torque
(in accordance with SAE J1349) 11.3 N•m (8.3 ft-lb) at 2,500 rpm
Fuel tank capacity 0.93  (0.25 gal)
Cooling system Forced air
Ignition system Transistorized magneto
PTO shaft rotation Counterclockwise
* The power rating of the engine indicated in this document is the net
power output tested on a production engine for the engine model and
measured in accordance with SAE J1349 at 3600 rpm. Mass production
engines may vary from this value. Actual power output for the engine
installed in the final machine will vary depending on numerous factors,
including the operating speed of the engine in application, environmental
conditions, maintenance, and other variables.
ITEM SPECIFICATION MAINTENANCE
Spark plug gap 0.7 ~ 0.8 mm
(0.028 ~ 0.031 in)
Refer to page 7.
Valve clearance (cold) IN: 0.15 ± 0.04 mm
EX: 0.20 ± 0.04 mm
See your authorized
Honda dealer.
Other specifications No other adjustments needed.
Fuel Type Unleaded gasoline with a pump octane
rating of 86 or higher (page 6).
Engine Oil Type SAE 10W-30, API SJ for general use.
Refer to page 7.
Carburetor Idle Speed 1,400 ± 150 rpm
Spark plug Type BPR6ES (NGK)
Maintenance Before each
use Check engine oil level. Refer to page 7.
Check air filter. Refer to page 7.
First 5 hours Change engine oil. Refer to page 7.
Subsequent Refer to the maintenance schedule on
page 6.
GCV190-160 OM_English with Electric Start2.fm Page 11 Wednesday, February 7, 2007 8:03 AM