HP R830/R840 - Manual (Page 33)

6 Transferring and printing images
Regularly transferring images to your computer and deleting them from the memory card
will reduce the time it takes to turn on your camera, to review images, and to transfer
images. You can transfer pictures and video clips with or without the HP Photosmart
Software that came with your camera. However, the HP Photosmart Software has several
features for transferring and managing your images and also guides you through the
transfer process.
NOTE: Transferring a large number of high-resolution images from a memory card
to your computer may take up to two hours. Even if your Image Display turns off during
the transfer process or it appears that nothing is happening on the computer, do not
disconnect your camera from your computer until your computer indicates that image
transfer is complete.
Transferring images with HP Photosmart Software
If you have installed the HP Photosmart Software (see “Install the software” on page 8 ),
use this method to transfer images and video clips to your computer.
When you connect your camera to a computer with the HP Photosmart Software installed:
•
If you have marked images for printing (see “Marking images for printing”
on page 35 ) and the computer is connected to a printer, the marked images are
automatically printed.
• If you have marked images for sharing (see “Sharing images” on page 36 ) and the
computer is connected to the Internet, the selected images are automatically sent to
their destinations.
• If you have marked images to buy as prints (see “Buying prints online”
on page 36 ) and the computer is connected to the Internet, you can follow the
instructions on the computer screen to buy prints of those images you selected.
• If you have tagged images (see “Tagging images” on page 24 ), the tags are
transferred with the images to your computer.
• You can transfer the images on the camera to the computer by following the
instructions on the computer screen. Panoramic sequences that you have not stitched
on the camera (see
“Using Panorama mode” on page 16 ) are automatically stitched
as you transfer them.
TIP: You can also perform these tasks using an optional HP Photosmart dock (see
the documentation that came with your dock).
To transfer images using the HP Photosmart Software:
1. If you have marked images for sharing, printing, or buying prints online (see
“Using
HP Photosmart Express” on page 35 ), verify that the computer is connected to a
printer and/or the Internet.
2. Turn off the camera.
Transferring and printing images 31