HP R830/R840 - Manual (Page 19)

software” on page 8 ), you can also stitch panoramas automatically as you transfer them
to your computer.
1. While in
Picture Capture, press Mode, use to select either Panorama (left
to right) or Panorama (right to left), then press .
2. Press the Shutter button to take the first picture in the panoramic sequence.
3. Position the camera to take the second picture.
Use the transparent overlay of the first image
superimposed on one third of the Image Display
to align your second picture with the first.
4. Press the Shutter button to take the second
picture.
5. Continue adding up to three more pictures to the
panorama, or press to end the panoramic
sequence.
During Instant Review (see “Instant Review” on page 11 ), each image in the panoramic
sequence is displayed. When the last image is displayed, you can stitch the sequence
by pressing , then pressing
when the stitched panorama appears. You can also
delete the panoramic sequence by pressing , selecting Entire Panoramic
Sequence, then pressing
.
Using the Picture Capture and Video Record menus
The Picture Capture and Video Record menus allow you to adjust camera
settings that affect the characteristics of the pictures and video clips you capture. The
Picture Capture Menu displays only those features available for taking pictures while
the Video Record Menu displays only features available for recording video clips.
1. Slide to or , then press .
2. Use to highlight an option, then press to display the option’s menu.
3. Use to highlight a setting, then press to change the setting or press to
exit without changing the setting.
4. To exit the menu, press repeatedly until you return to Picture Capture or
Video Record.
For on-camera information about an option, use to highlight Help... in the option's
menu, then press .
Using the Picture Capture and Video Record menus 17