Huffy 11S0057 - Manual (Page 23)

05/04 P/N 211472
23
1.
Place assembled unit to desired location. Fill tank with water (28 gallons (114 liters))
or sand (360 lb. (163 kg)) and snap tank cap (28) in place.
Secure system rigidly to a flat,
solid (preferably concrete)
surface using lag bolts or a
similar anchoring system
through holes in support feet as
shown.
This step must be done to
conform to EN1270 standards.
SECTION D: SECURING THE SYSTEM
28
ADD TWO GALLONS (7.6
LITERS) OF NON-TOXIC
ANTIFREEZE IN SUB-
FREEZING CLIMATES.
CAUTION!
IF FILLING WITH SAND:
2 GALLONS OF ANTI-
FREEZE IS NOT
REQUIRED
NOTE:
S
A
N
D
S
A
N
D
(3
6
0
l
b
.)
(3
6
0
l
b
.)
(1
6
3
k
g
)
(1
6
3
k
g
)
TWO PEOPLE REQUIRED
FOR THIS PROCEDURE.
FAILURE TO FOLLOW THIS
WARNING COULD RESULT IN
SERIOUS INJURY AND/OR
PROPERTY DAMAGE.
WARNING!