Hoshizaki SELF-CONTAINED CRESCENT CUBER L1F015102 - Manual (Page 19)

16
17) Wash the Bin Control Switch, Water Tank, Float Switch, Cube Guide and Overflow Pipe
by using a nylon scouring pad, brushes and the cleaning solution. In addition to the
removed parts, also wash the bin liner and Bracket (L) (R) with the solution.
18) Discard the cleaning solution and rinse the parts thoroughly with water.
2. Sanitizing Procedure - Following Cleaning Procedure
1) Dilute approximately 0.5 fl. oz. (15 ml or 1 tbs) of a 5.25% sodium hypochlorite solution
(chlorine bleach) with 1 gallon (3.8 lit.) of warm water. Using a chlorine test strip or
other method, confirm that you have a concentration of about 200 ppm.
Fig. 8
Cube Guide
Water Tank
* The Bin Control Switch is accessible
by removing the Water Tank.
15) Pull the Cube Guides (quantity varies depending on model) upward to remove them
from the Water Tank. They are snapped in place. See Fig. 8.
16) Same as step 1.