HP ep7100 - Manual (Page 40)

40 User’s Guide
Adjusting the projector
VGA settings... Adjusts settings for a computer input.
Auto-sync Resynchronizes the projector to the input signal. This
can compensate for any change in the signal.
Frequency Adjusts the timing of the projector relative to the
computer.
Tracking Adjusts the phase of the projector relative to the
computer.
Vertical offset Adjusts the picture up or down within the projection area.
Horizontal offset Adjusts the picture left or right within the projection area.
Picture Mode Adjusts color and picture settings to one of several
combinations designed for different types of viewing
situations. You can use a different picture mode for each
source or each viewing environment. You can also
customize each picture mode.
Customize picture
mode... Changes settings associated with the current picture
mode.
Picture enhancement Refines the color, lightness, and other characteristics of
the picture.
Color temperature Shifts colors toward red or blue.
Stretch Selects how the picture fits on the screen:
■ Best fit automatically fits the picture without stretching
it.
■ 1-to-1 shows each picture dot as one projected dot.
■ Reduced fits a standard-shape picture onto a
widescreen projection screen.
Picture shift Moves the picture within the projection area. This is
useful if you are viewing a picture that is smaller than the
full projection area, such as a widescreen movie.
Reset picture shift Resets the picture shift to zero (centered).
Reset this picture
mode Restores the current picture mode to its default settings.
Picture menu (Continued)