haier HRF-663ASB2* EN - Manual (Page 16)

Digital display operation
Ice maker and dispenser operation
A. Intelligent mode key indicator G. Superfrost indicator
B. Superfrost key H. Freezer temperature display
C. Freezer temperature adjustment key I. Refrigerator temperature display
D. Refrigerator temperature adjustment key J. Crushed ice indicator
E. Ice/water selector K. Refrigerated water
F. Intelligent mode indicator L. Ice cube indicator
Intelligent mode
In the Intelligent operating mode, the temperature inside the appliance is
adjusted automatically according to variations of the ambient temperature.
Press key A once, upon which indicator F lights up and Intelligent mode is
entered. Press key A once again, upon which indicator F goes off and
Intelligent mode is cancelled.
Malfunction indicator
In the event of major or minor control malfunctions, the freezer and
refrigerator temperatures are not displayed. Contact customer support if
necessary.
Precautions
● Do not connect the ice maker water line when the temperature is below 0
ºC, otherwise the water line may freeze
● Open the valve and flush the water line to check the line connections for
possible leaks. Close the valve again when the water is clean and clear.
● The ice maker does not become operational until the temperature has
reached or gone under -15 °C. (Do not consume the first batch of ice cubes.)
● After setting up the appliance, be sure to check that the water supply line is
properly positioned so that it will not be pinched or damaged.
● The ice maker must be installed by an authorized representative.
● The ice maker must be connected to a standard cold water pipe.
● If the water dispenser indicator does not work, contact customer service or a
qualified professional for repair.
Ice maker operation
Each cycle produces eight ice cubes. The ice cube production capacity
depends on variations of the ambient temperature and how frequently the
door is opened.
Do not consume the first ice cubes after starting up the appliance for the first time
or following a long period of inoperation.
Arrange the ice cubes manually to make sure that the container has been filled.
A few of the eight ice cubes produced in one ice maker cycle may stick together.
Control panel
Caution: Let the appliance operate at least 24 hours before starting ice cube
production.