HP 2500n - Manual (Page 139)

ENWW Appendix D Working with memory and print server cards 137
Checking DIMM installation
Check that the DIMMs are installed correctly and working.
To check DIMM installation
1 Turn the printer on. Check that the Ready light is on after the printer has gone through the
startup sequence. If an error message appears, a DIMM might have been incorrectly
installed.
2 Print a Configuration page by pressing ( G O ) and ( C ANCEL J OB ) simultaneously. (A
Supplies Status page and possibly an HP Jetdirect Configuration page also print.)
3 Check the Installed Personalities and Options section on the Configuration page and
compare it with the Configuration page printed before the DIMM installation.
4 If the amount of recognized memory has not increased or the font DIMM is not recognized:
• The DIMM might not be installed correctly. Repeat the installation procedure.
• The DIMM might be defective. Try installing a different DIMM.
5 Once you have installed the DIMM correctly, go to “Enabling memory” on page 138 if you
installed a memory DIMM or “Enabling the language font DIMM” on page 138 if you installed
a language font DIMM.