HP L1581A - Manual (Page 24)

24 User’s Guide
Presenting from a Networked Computer
To start a presentation
1. Be sure the projector is turned on and its network connection is set up.
See Chapter 1, “Setting Up the Projector,” on page 7.
2. Be sure the Wireless Presenter-to-Go software is installed. See “To prepare your
computer for networked presentations” on page 18.
3. If your computer display is not using XGA resolution (1024 × 768), change
your computer to XGA resolution by selecting Start > Control Panel >
Display > Settings.
4. Select Start > Programs > Hewlett-Packard > Wireless Presenter > Presenter
Panel.
5. Select the desired projector from the list.
If the projector is not shown in the list or if its icon is red, especially if it is not on
the local network, click Other Projector and enter its network settings.
If no projectors are found in the list, you are prompted to enter the network
settings for the projector you want to use.
✎
For an Ad Hoc wireless connection or a wired network connection, you can find
projector settings in the projector’s on-screen menu at Quick choice > Wireless
Presenter.
If the projector is connected to an access point but this is not your normal wireless
network, check with the network administrator for the correct settings for the access
point, including the SSID, encryption options, and TCP/IP settings.