HP L1581A - Manual (Page 22)

22 User’s Guide
Presenting from a Networked Computer
✎
The steps below are optional because Wireless Presenter-to-Go can set up your
wireless connection. However, if you set it up in advance, you can find and connect to
projectors more quickly.
If the projector has a wireless card, open the on-screen menu and select
Quick choice > Wireless Presenter. This screen shows wireless settings you
need for making a wireless Ad Hoc connection.
If the projector has a wired or wireless Infrastructure connection to an access point but
this is not your normal wireless network, check with the network administrator for the
correct settings for the access point, including the SSID, encryption options, and
TCP/IP settings.
Use the following instructions to configure the network settings (Windows XP path
provided). See network connections in Windows help or ask the network administrator
for more information.
1. On your computer, select Start > Control Panel > Network and Internet
Connections.
2. Double-click Network Connections.
3. Right-click Wireless Network Connection, and click Properties.
4. Click Configure under the name of the wireless card on the General tab.
5. Click the Advanced tab.
The actual locations of the wireless settings can vary for different wireless cards
or transmitters.