Horizon Fitness CLUB SERIES E700 - Manual (Page 5)

BEFORE
YOU
BEGIN
8
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ASSEMBL
Y
BEFORE
YOU
BEGIN
ELLIPTICAL OPERA
TION
LIMITED
W
ARRANTY
TROUBLESHOOTING
&
MAINTENANCE
CONDITIONING
GUIDELINES
BEFORE YOU
BEGIN
ASSEMBL
Y
INTRODUCTION
IMPORT
ANT
PRECAUTIONS
ELLIPTICAL OPERA
TION
CONDITIONING GUIDELINES
TROUBLESHOOTING &
MAINTENANCE
LIMITED WARRANTY
ASSEMBLY STEP 2
MAIN FRAME
REAR STABILIZER
BOLT (A)
SPRING WASHER (B)
FLAT WASHER (C)
SCREW (B)
A) Open HARDWARE BAG FOR STEP 2.
B) Secure REAR STABILIZER to MAIN FRAME using 2 SCREWS (B).
NOTE: Make sure holes are aligned before inserting SCREWS.
SCREWS (B)
30 mm
Qty: 4
HARDWARE BAG FOR STEP 2 CONTENTS :
CONSOLE WIRES
TOP COVER
CONSOLE MAST
GROMMET
MAIN FRAME
BOLTS (C)
LOCK WASHERS (D)
ASSEMBLY STEP
A) Open HARDWARE BAG FOR STEP 3.
B) Slide the GROMMET and TOP COVER over the CONSOLE MAST.
C) Carefully pull the CONSOLE WIRES through the CONSOLE MAST using the twist tie located inside the
CONSOLE MAST.
D) Attach CONSOLE MAST to MAIN FRAME using 7 BOLTS (C) and 7 LOCK WASHERS (D) .
E) Slide GROMMET and TOP CAP down to seal the MAIN FRAME.
BOLTS (C)
15 mm
Qty: 7
LOCK WASHER (D)
13.5 mm
Qty: 7
HARDWARE BAG FOR STEP CONTENTS :
* NOTE: Be careful not to
pinch any wires while
assembling the mast.
E500-E800_Rev.1.7.indd 8-9 4/27/07 1:43:48 PM