HHB comm PERSONAL COMPACT DISC RECORDER CDR 830 - Manual (Page 39)

39
7 Additional information
Understanding display messages
Below is a list of messages you’ll see during normal operation of the CDR–830 together with a brief
explanation of what they mean.
If you need more information, turn to the page indicated.
Note: In the table below, ** indicates a track number.
Message Description Reference
TOC READ The recorder is reading the disc's TOC (Table of Contents). Wait
for the message to disappear. p. 15
SYNC–1 The unit is in 1-track automatic digital recording mode. Recording
starts when the recorder detects the digital source input signal. p. 19
SYNC–ALL The unit is in all-track automatic digital recording mode. Recording
starts when the recorder detects the digital source input signal. p. 20
PMA REC The recorder is writing TOC data to the disc's PMA (Program
Memory Area). Never turn off the power while this display is
showing.
******** SKIP SET Confirm that you want to set a skip ID by pressing the SKIP ID SET
button. p. 29
******** SKIP CLR Confirm that you want to set a skip ID by pressing the SKIP ID
CLEAR button.
p. 29
ERASE LAST? Confirm that you want to erase the last track of a CD-RW disc by
pressing
6 (8 on the remote control).
p. 37
ERASE ALL? Confirm that you want to erase all tracks on a CD-RW disc by
pressing
6 (8 on the remote control).
p. 37
ERASE TOC? Confirm that you want to erase the TOC of a finalized CD-RW disc
to return it to a non-finalized state. After doing this, you can
record more material on the disc. p. 38
ERASE **** **** – **** **** ? Confirm that you want to erase tracks recorded on a CD-RW disc. p. 37
INITIALIZE? Confirm that you want to re-initialize the CD-RW disc by pressing
6 (8 on the remote control). p. 38