HHB comm PERSONAL COMPACT DISC RECORDER CDR 830 - Manual (Page 37)

37
6 More recording features
Erasing a CD-
RW disc
Although more expensive than
CD-R discs, the great advantage
of CD-RW is that the discs can be
erased and reused. Various erase
options are available depending
on whether the disc has been
finalized.
A third, special option, erases (re-
initializes) the whole disc. This
process takes quite a long time to
complete and should be used for
recovering damaged discs, not
for erasing tracks from a healthy
disc.
Caution!
Never switch off the power during
CD-RW erasing - your disc may
become unusable.
If the message CHECK DISC
appears any time during any
erase process, press
0, take out
the disc, clean it, then try the
erase command again.
Be sure to remove the disc from
the recorder before switching off
the power, otherwise the erase
operation will not be completed.
When a non-finalized
disc is loaded
1 Press ERASE.
The display shows ERASE LAST ? .
• Press 7 to cancel last track
erase here.
2 Use the jog dial or press
4
4 4 4 4 and ¢ ¢ ¢ ¢ ¢ on the remote
control to change the erase
option.
Switch between:
ERASE LAST ? – erase just the last
track
ERASE ALL ? – erase all tracks
ERASE 02 –[ LAST TRACK ]? – erase
track 2 and all subsequent tracks
ERASE 03 –[ LAST TRACK ]? – erase
track 3 and all subsequent tracks
Keep turning the jog dial or press
4 and ¢ on the remote
control to change the number of
tracks to erase.
3 Press 8 8 8 8 8 (6 6 6 6 6 on the front
panel) to start erasing.
The process takes just a few
seconds. During this time, the
function indicator lights.
MONITOR
INPUT SELECTOR AUTO MANUAL
TITLE/MODE
TRACK NO. WRITE
DISPLAY
FINALIZE ERASE
SCROLL
CD TEXT
1
DIGITAL REC LEVEL ANALOG REC LEVEL
MENU/ DELETE TEXT
SYNCHRO
PROFESSIONAL
2
3