HHB comm PERSONAL COMPACT DISC RECORDER CDR 830 - Manual (Page 11)

11
2 Connecting up
POWER-CORD CAUTION
Handle the power cord by the plug part. Do not
pull out the plug by tugging the cord, and never
touch the power cord when your hands are wet,
as this could cause a short circuit or electric
shock. Do not place the unit, a piece of
furniture, or other object on the power cord or
pinch the cord in any other way. Never make a
knot in the cord or tie it with other cords. The
power cords should be routed so that they are
not likely to be stepped on. A damaged power
cord can cause a fire or give you an electric
shock. Check the power cord once in a while. If
you should find it damaged, ask your nearest
HHB authorized service center or your dealer for
a replacement.
Connecting up for analog
playback & recording
Before you start, make sure that all the
components are switched off and disconnected
from the wall outlet.
Next, connect this unit to your mixer, recorder
or monitoring system using the two sets of
supplied audio leads.
The input to the CDR-830 must be connected to
the output of the external device - console etc.
and the output of the recorder connected to the
monitoring path of the console, or other
monitoring device.
INPUT OUTPUT
PLAY REC
L
R
MD/TAPE
LINE
IN
DIGITAL IN
OPTICAL COAXIAL OPTICAL COAXIAL
DIGITAL OUT
AC IN REC
OUT
PLAY
L
R
L R
L R
L R
L R
CDR–830
Analog console, recorder or
monitoring system