Control settings, Energy options, Cycles – Hotpoint HDA100 User Manual
Page 9: Start
Energy Options
WASH TEMP
Provides extra heat for best performance. It is used
BOOST ON/
best with heavily-soiled dishes.
HEATED WASH
WASH TEMP
Turns TEMP BOOST off.
BOOST OFF
HEATED DRY/
Turns the drying heater on for fast drying. This cycle
HEATED DRY ON will extend the time to your wash cycle.
HEATED DRY
Shuts off the drying heat option. Dishes air dry
OFF
naturally and energy is saved.
ENERGY SAVER Turns all Options off.
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Control Settings
Cycles
POTS & PANS/
For heavily soiled dishes or cookware with dried-on
HEAVY WASH
or baked-on soils. Everyday dishes may be included.
This cycle will not remove burned-on foods.
NORMAL WASH For loads of everyday dishes, glasses and cookware
with medium soils.
NOTE: Many dishes have lighter
soil than normal. Choosing a cycle other than
NORMAL WASH will save energy and water.
LIGHT WASH/
For dishes with light soils.
WATER SAVER
RINSE & HOLD
For rinsing partial loads that will be washed later.
Do not use detergent.
PLATE WARMER For warming clean dishes and serving plates. This
cycle will take approximately 32 minutes.
■
Make sure the Dial is at the
OFF
position.
■
Latch the door.
1
2
Start
Slowly turn the Dial to the
START or ON
position. Don’t
turn it past the
START or ON
position, or you could
accidentally miss a rinse. There is a time delay between
start-up and water fill so you will not hear any wash
action right away.
3
9