Before you call for service, Before you call for service –25 – Hotpoint HDA100 User Manual
Page 21
21
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Problem
Possible Causes
What To Do
Dishwasher won’t run
Fuse is blown, or the
•
Replace fuse or reset
circuit breaker tripped
circuit breaker. Remove
any other appliances from
the circuit.
Noise
Some of the sounds
•
Soft food disposal
you’ll hear are normal
shredding action.
•
Drain valve opening to
pump water out.
•
Timer control as cycle
progresses.
•
Detergent cup opening.
•
The motor stopping during
the drying period.
Utensils are not secure
•
Make sure everything is
in the rack or something
secured in dishwasher.
small has dropped into
the rack
Motor hums
•
Dishwasher has not been
used on a regular basis. If
you do not use your
dishwasher often, set it to
fill and pump out once
every week. This will help
keep the seal moist and
the garbage disposer clear.
Detergent cup lid
Dial is not in the
OFF
•
Turn the Dial to
OFF
won’t latch
position
and slide the door latch to
the left.
Detergent left in
Dishes are blocking the
•
Reposition the dishes.
dispenser cups
detergent cups
Before you call for service…
Troubleshooting Tips
Review the charts on the following pages first and you may not
need to call for service.