Heavy, normal & water saver, Cycle sequence – Hotpoint HDA100 User Manual
Page 11
Heavy, Normal & Water Saver
(HDA150 and HDA180
only)
Be sure the door is unlatched.
Slowly turn the dial to the cycle you want. Don’t
turn it past this position, or you could accidentally
miss a rinse.
Select any options.
Latch the door to start the cycle.
4
3
2
1
OFF
DRYING
HEAVY WASH
NORMAL WASH
WATER SAVER
RINSE & HOLD
(HEATED DRY OFF)
Customer Ser
vice
Tr
oubleshooting T
ips
Operating Instr
uctions
Safety Infor
mation
Cycle Sequence
Water
Time
Cycles
(approx.)
(approx.)
Cycle Sequence
POTS & PANS
10. 0 gal.
63 min.
Rinse Rinse Rinse Main Wash Rinse Rinse Rinse
HEAVY WASH
10.3 gal.
57 min.
Rinse Rinse Rinse Main Wash Rinse Rinse Rinse
NORMAL WASH
8.5 gal.
57 min.
Rinse
Rinse Rinse Main Wash Rinse Rinse Rinse
LIGHT WASH
7.7 gal.
63 min.
Rinse Rinse
Rinse Main Wash Rinse Rinse
Rinse
WATER SAVER
6.6 gal.
55 min.
Rinse Rinse
Rinse Main Wash Rinse Rinse Rinse
RINSE & HOLD
3.6 gal.
11 min.
Rinse Rinse Rinse Main Wash Rinse
Rinse Rinse
Drying Options:
HEATED DRY ON.
Available on all wash cycles except
RINSE & HOLD.
Add approximately 32 minutes to the
cycle.
HEATED DRY OFF.
Drying heater is turned off. Dishes dry
naturally.
11