Honeywell VOYAGER 1250G - Manual (Page 63)

3 - 11
CodeGate
®
When CodeGate is On, the button is used to allow decoded data to be
transmitted to the host system. The scanner remains on, scanning and
decoding bar codes, but the bar code data is not transmitted until the button
is pressed. When CodeGate is Off, bar code data is transmitted when it is
decoded.
Default = CodeGate Off in-Stand, CodeGate On Out-of-Stand.
Object Detection Mode
Object Detection Mode uses an LED to detect when an object is in the
scanner’s field of view. When an object is detected, the laser turns on and
the scanner attempts to scan the bar code.
Default = Object Detection
Mode On In-Stand.
CodeGate On
In-Stand
* CodeGate Off
In-Stand
* CodeGate On
Out-of-Stand
CodeGate Off
Out-of-Stand
* Object Detection Mode On
In-Stand
Object Detection Mode Off
In-Stand
Object Detection Mode On
Out-of-Stand
* Object Detection Mode Off
Out-of-Stand