Honeywell VOYAGER 1250G - Manual (Page 137)

6 - 41
scanning the bar code below, then setting the timeout (from 0-65535 milli-
seconds) by scanning digits from the
Programming Chart , then scanning
Save . Default = 100.
Note: The Addenda Timeout setting is applied to all addenda and coupon
code searches.
UPC-E0
UPC-E0 On/Off
Most U.P.C. bar codes lead with the 0 number system. To read these
codes, use the UPC-E0 On selection. If you need to read codes that lead
with the 1 number system, use
EAN/JAN-13 (page 6-45). Default = On.
UPC-E0 Expand
UPC-E Expand expands the UPC-E code to the 12 digit, UPC-A format.
Default = Off.
Addenda Timeout
* UPC-E0 On
UPC-E0 Off
On
* Off