Harbor Freight Tools 55525 - Manual (Page 10)

for technical questions, please call 1-800-444-3353;
troubleshooting section at end of manual.
Page 10 SKU 55525
GROUnDED tOOLs: tOOLs WItH tHREE pROnG pLUGs
Tools marked with “Grounding Required” have a three wire cord and three prong
grounding plug. The plug must be connected to a properly grounded outlet. If the tool
should electrically malfunction or break down, grounding provides a low resistance
path to carry electricity away from the user, reducing the risk of electric shock.
The grounding prong in the plug is connected through the green wire inside the
cord to the grounding system in the tool. The green wire in the cord must be the
only wire connected to the tool’s grounding system and must never be attached to
an electrically “live” terminal.
Your tool must be plugged into an appropriate outlet, properly installed by a certi-
fied electrician and grounded in accordance with all codes and ordinances.
ExtEnsIOn CORDs
An ExtEnsIOn CORD MUst nEVER bE UsED WItH tHIs ItEM. Use of an
extension cord could result in damage to the item or fire.
syMbOLOGy
Double Insulated
Canadian Standards Association
Underwriters Laboratories, Inc.
V~
Volts Alternating Current
A
Amperes
n0 xxxx/min. No Load Revolutions per Minute (RPM)
UnpACKInG
When unpacking both boxes, check to make sure all the parts shown on the parts
Lists on pages 28 through 30 are included, in addition to the face shield, wire brush/
hammer, and strap (for cylinder connection). If any parts are missing or broken, please
call Harbor Freight Tools at the number shown on the cover of this manual as soon as
possible.
1.
2.
3.
1.