Harbor Freight Tools BELT SANDER - 1 X 30 INCHES 2485 - Manual (Page 2)

Page 2 SKU 02485 for technical questions, please call 1-800-444-3353.
reV 04/05
specificAtiOns
Power Consumption 120 V~, 60 Hz, 3 A
Motor
1/3 HP, 3400 RPM
Line Cord 6’, 3-prong grounded plug, UL listed
Table Size 5-1/16” (W) x 5-1/8” (L)
Table Tilt 0 ~ 45°
Belt Size 1” (W) x 30” (dia.)
Overall Dimensions 11-1/8” (L) x 9” (W) x 13-1/2” (H)
Vacuum Chute 1-3/4” (dia.)
Weight 13.3 lb.
save this Manual
You will need this manual for the safety warnings and precautions, assembly, operating,
inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your
invoice with this manual. Write the invoice number on the inside of the front cover. Write the
product’s serial number in the back of the manual near the assembly diagram, or write month
and year of purchase if product has no number. Keep this manual and invoice in a safe and
dry place for future reference.
generAl sAfety rules
wArning!
reAd And understAnd All instructiOns
failure to follow all instructions listed below may result in
electric shock, fire, and/or serious injury.
sAVe tHese instructiOns
wOrk AreA
keep your work area clean and well lit. Cluttered benches and dark areas invite
accidents.
do not operate power tools in explosive atmospheres, such as in the presence
of flammable liquids, gases, or dust. Power tools create sparks which may ignite
the dust or fumes.
keep bystanders, children, and visitors away while operating a power tool. Dis-
tractions can cause you to lose control. Protect others in the work area from debris
such as chips and sparks. Provide barriers or shields as needed.
electricAl sAfety
grounded tools must be plugged into an outlet properly installed and grounded
in accordance with all codes and ordinances. never remove the grounding prong
1.
2.
3.
1.
232266