HONDA 08B21-SJC-102 User Manual

Page 9

AII 36587 (0705)

9 of 17

28. Remove the tailgate trim:

•

Remove the four screws and release the one
end clip on each side.

•

Sharply push the tailgate to the right to release
the 16 clips from the trim.

•

Remove the 16 clips from the tailgate and
reinstall the 16 clips to the tailgate trim in the
direction shown.

31. Center punch the tailgate at the marks on the

template. Remove the template.

30. Get the template. Using a scissors, cut out the

marked area from the template. Align the edge of
the template with the edge of the tailgate as
shown, and attach it to the tailgate tape.

29. Remove the tailgate panel (seven TORX screws).

4605080T

4 SELF-
TAPPING
SCREWS

2 CLIPS

TAILGATE TRIM

16 CLIPS

TAILGATE
TRIM

4605090T

7 T40 TORX
SCREWS

TAILGATE
PANEL

4707041K

OUTER
TAILGATE

CUT
TEMPLATE

9 TAPES

TEMPLATE

CUT
AREA

TAILGATE
UPPER
HANDLE

4708010K

CENTER
PUNCH

CUT
TEMPLATE

TAILGATE

4 MARKS

TAILGATE
UPPER
HANDLE