Husqvarna 230 ACX - Manual (Page 42)

English - 43
5. CONTROL PANEL
5.2 Programs
3. A
4. B
5. C
Under the program buttons you can save sets of
different settings, to reuse or to simplify the use of
Automower™ in several gardens. Under respective
buttons there are some preset settings. You can
choose to use these or change them.
• To change settings: Make the required settings.
Save by holding down the selected button for
2 seconds, until two beeps are heard close
together. If, for example, button A is pressed the
message Program A changed will be shown for
2 seconds on the display.
• Use the saved information by quickly pressing the
required button.
If, for example, button A is pressed the question
Use program A? will appear on the display. If YES
is pressed, the Program A will be selected. The
letter A is then shown on the right-hand side of the
display to indicate which program is selected.
5.3 Select
6. Cancel:
• Press to go back one step in the menu structure,
or to interrupt an ongoing input.
7. YES:
• Press to confirm an entry or selection.
• Press to start the mower if more than
20 seconds has elapsed since you last pressed
a button and you want to close the control panel
cover.
8. Arrow up and arrow down:
Press any of the arrow buttons to move the cursor
between menus or different selections.
3
4
5
6 7 8