Hayter Mowers Clipper 46 401R - Manual (Page 38)

Continued.
PROBLEM POSSIBLE FAULT REMEDY
Uneven cut Grass is wet Mow dry grass
Undulating ground conditions Change direction of travel
Cutterbar worn Sharpen the cutterbar
Cutterbar out of balance Balance the cutterbar
Wheels damaged Inspect and replace as necessary
Mower is hard to push Cut height too low Increase cut height
Wheels damaged Inspect and replace
as necessary
Mower will not self propel Clutch out of adjustment Adjust clutch
Drive belt damage Replace drive belt
Poor mulching performance Underside of deck is dirty Clean underdeck
Height of cut set too low Increase height of cut
Cutterbar worn Sharpen the cutterbar
Grass is wet Mow dry grass
FAULT FINDING
401001EB100398A
1.37 1.37
FAULT FINDING