Hitachi VTMX-231A - Manual (Page 36)

TIMER RECORDING
36
Press STOP/EJECT button on the VCR.
NOTE: The STOP button on the remote control will not function in the Automatic Timer Recording mode.
CANCELING OR CHECKING THE START/END TIME
1) Turn the power on.
2) Press MENU button.
3) Select a program number you want to check using /PLAY or /STOP button. The details of selected program appears
on the TV screen.
You may cancel the entire program by pressing REW/ button.
4) Press RESET/EXIT button to return to original mode.
AUTO RETURN
If you choose auto return to [AUTO] from the menu, when all the timer recordings finish, the VCR will rewind to the
beginning of the recorded programs(s).
Make sure...If there are any remaining programs Once, Daily & Weekly, this function will not occur.
1 Select "VCR SET UP"
Press MENU button repeatedly so that the VCR SET UP menu appears.
2 Select "AUTO RETURN"
Press /PLAY or /STOP button repeatedly to point to "AUTO RETURN".
VCR SET UP
AUTO
REPEAT
RENTAL
→
AUTO RETURN
3 Select "AUTO"
Press F.FWD/ button so that [AUTO] will appear next to "AUTO RETURN".
VCR SET UP
AUTO
REPEAT
RENTAL
→
AUTO RETURN [AUTO]
4 Exit the Auto Return mode
Press RESET/EXIT button to return to original mode.