Hitachi VTMX-231A - Manual (Page 20)

PREPARATION FOR USE
20
6 Select the minute
Press /PLAY or /STOP button repeatedly until the desired minute appears. (Example: 40)
Then, press F.FWD/ button.
SETTING CLOCK
MONTH DAY YEAR
03 / 01 SUN 1998
HOUR MINUTE AM/PM
05 : 40 - -
7 Select "AM" or "PM"
Press /PLAY or /STOP button repeatedly to point to "AM" or "PM". (Example: PM)
SETTING CLOCK
MONTH DAY YEAR
03 / 01 SUN 1998
HOUR MINUTE AM/PM
05 : 40 PM AM
→
PM
8 Start the clock
Press RESET/EXIT or F.FWD/ button.
Although seconds are not displayed, they begin counting from 00 when you press RESET/EXIT or F.FWD/ button. Use
this feature to synchronize the clock with the correct time.
• When unplugging the AC-cord or if there is a power failure for more than 30 seconds, you may have to reset clock.
• If the display shows an abnormal reading or no reading, unplug the power cord for more than 30 seconds. Then plug it back
in. And reset clock.
TO CHANGE CLOCK SETTING
1) Press MENU button until the INITIALIZE menu appears.
2) Press /PLAY or /STOP button to point to "SETTING CLOCK". Then, press F.FWD/ button.
INITIALIZE
CHANNEL SET UP
→
SETTING CLOCK
LANGUAGE SELECT