beautypg.com

Standard features, Quickspecs, Hp proliant ml310 generation 3 standard features – HP ProLiant ML310 User Manual

Page 3

background image

Processor

One of the following

Dual-core Intel® Pentium® D 940 (3.2 GHz/800 - 2 x 2MB L2)

NOTE: See "Configuration Information - Factory Integrated Models" section

Dual-core Intel® Pentium® D 930 (3.0 GHz/800 - 2 x 2MB L2)

Dual-core Intel® Pentium® D 920 (2.8 GHz/800 - 2 x 2MB L2)

NOTE: See "Configuration Information - Factory Integrated Models" section

Intel® Pentium® 4 650 (3.4 GHz/800 - 2M L2)

Intel® Pentium® 4 640 (3.2 GHz/800 - 2M L2)

Intel® Pentium® 4 630 (3.0 GHz/800 - 2M L2)

NOTE: See "Configuration Information - Factory Integrated Models" section

Intel® Celeron D® 331 (2.66 GHz/533 - 256KB L2)

Cache Memory

One of the following
depending on Model

Integrated 2 x 2MB level 2 ECC cache (Pentium D 900 Series models)

Integrated 2 x 1MB level 2 ECC cache (Pentium D 800 Series models)

Integrated 2MB level 2 ECC cache (Pentium 4 models)

Integrated 256KB level 2 ECC cache (Celeron D models)

Memory Protection

Advanced ECC

Memory

Type

PC2-4200 unbuffered DDR2 SDRAM (533MHz)

Standard

512 MB (1 x 512 MB)

Maximum

8 GB

Network Controller

Embedded NC320i PCIe Gigabit Server Adapter

Expansion Slots

Slot Number

Bus Speed

Maximum Card

Length

Hot Plug

Connector Type

4

PCI Express x4

12.3

No

x8

3

64-bit/100MHz

PCI-X

12.3

No

3.3V

2

64-bit/100MHz

PCI-X

12.3

No

3.3V

1

PCI Express x1

12.3

No

x1

Storage Controllers

One of the following
depending on Model

The HP ProLiant ML310 G3 offers both SCSI and Serial models. SCSI models support U320 SCSI
hard drives. Serial models support Serial Attached SCSI (SAS) and Serial ATA (SATA) hard
drives. Use of SAS hard drives in Serial models requires installation of a SAS controller or HBA.

Single Channel Ultra320 SCSI Adapter (in PCI-X slot) (SCSI Models)

Integrated four port SATA controller with integrated SATA RAID 0, 1 (SATA Models)
NOTE: Use of the embedded SATA RAID feature requires installation of a driver from a floppy
drive. The supported floppy drive can be a USB floppy drive, half-height internal floppy drive, or
virtual floppy via Integrated Lights-Out 2 (iLO 2).

NOTE: See the "Storage" section of these QuickSpecs for information on controllers and cables
required to support SATA and SAS hard drive configurations

QuickSpecs

HP ProLiant ML310 Generation 3

Standard Features

DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007

Page 3