HP ProLiant ML310 - Manual (Page 27)

System Unit Dimensions (HxWxD) 17.0 x 7-7/8 x 22 in (43.0 x 20.0 x 55.0 cm)
Weight (approximate) 37 lb (16.8 kg)
Input Requirements
(per power supply) Range Line Voltage 100-127V and 200-240V
Normal Line Voltage 115 to 230 VAC
Line Frequency 50 to 60 Hz
Rated Input Current < 6A RMS at 90VAC with maximum load
BTU Rating 1,560 BTU
SCSI Connectors
(SCSI Models only)
One internal HD68 connectors
NOTE: Support for either one internal or one external SCSI channel is
available. To use the channel for external connection, order an internal-
to-external SCSI cable option kit (PN 159547-B22 or 333370-B21).
Power Supply Output
Power Rated Steady-State
Power 350W
Maximum Peak Power 370W
Temperature Range Operating 50° to 93° F (10° to 35° C)
Shipping -40° to 150° F (-40° to 66° C)
Relative Humidity
(non-condensing) Operating 20% to 80%
Non-operating 5% to 90%
Acoustic Noise Idle
(Fixed Disk Drives
Spinning)
L WAd (BELS) 5.7
L pAm (dBA) 40
Operating
(Random Seeks to Fixed
Disks)
L WAd (BELS) 5.7
L pAm (dBA) 40
48X Max IDE (ATAPI)
CD-ROM Drive Disk Applicable Disk CD-ROM, CD-XA, CD-DA (Mode 1, Mode 2,
Form 1 and 2)
Photo CD (Single and Multi-session)
Mixed Mode (Audio and Data combined)
CD-R
Capacity 540 MB (Mode 1, 12 cm)
650 MB (Mode 2, 12 cm)
Block Size Mode 1 2,048 bytes
Mode 2 2,340 bytes, 2,336 bytes
CD-DA 2,352 bytes
CD-XA 2,328 bytes
Interface IDE (ATAPI)
Access Times (typical) Random <100 ms
Full-Stroke <150 ms
Data Transfer Rate Sustained 3000 to 7200 KB/s (20X to 48X)
Burst 150 KBps to 7,200 KBps
Bus Rate 16.7 MBps
Cache Buffer 128 KB
QuickSpecs
HP ProLiant ML310 Generation 3
Technical Specifications
DA - 12364 Worldwide QuickSpecs — Version 21 — 2-16-2007 Page 27