Quickspecs – HP QUICKSPECS GS320 User Manual
Page 11
Step 6 - Configure Packaging Options
Step 6 - Configure Packaging Options
Step 6 - Configure Packaging Options
Step 6 - Configure Packaging Options
Step 6a - Redundant (N+1) Power Supplies
Step 6a - Redundant (N+1) Power Supplies
Step 6a - Redundant (N+1) Power Supplies
Step 6a - Redundant (N+1) Power Supplies
Power supplies included with Model 24 and Model 32 systems can support all combinations of CPUs, memory, and I/O that can be configured
within the system boxes.
Additional 48V power regulators can be ordered to provide N+ 1 power redundancy.
For Model 24 systems, order three power supplies to achieve N+ 1 capability; for Model 32 systems, order four power supplies to achieve N+1
capability.
2000W 48V power supply
H7506-BA
Step 6b - Internal System Expansion
Step 6b - Internal System Expansion
Step 6b - Internal System Expansion
Step 6b - Internal System Expansion
AlphaServer GS320 Model 24 and Model 32 systems support two additional shelves in the power cabinet
Available choices are:
One additional PCI drawer (master or expansion)
One additional PCI drawer (master or expansion) and one DS-SL13R-xx StorageWorks shelf, or
One or two StorageWorks DS-SL13R-xx shelves
Mixed configurations of BA36R and DS-SL13R-xx shelves are supported
Internal StorageWorks
Internal StorageWorks
Internal StorageWorks
Internal StorageWorks
Expansion
Expansion
Expansion
Expansion
System power cabinet provides space for up to two forward facing storage shelves.
Up to two DS-SL13R-xx Ultra3 SCSI (LVD) shelves; each shelf supports a maximum of 14
Ultra3 disk drives
Configuring
Configuring
Configuring
Configuring
DS-SL13R-xx Ultra3 (LVD)
DS-SL13R-xx Ultra3 (LVD)
DS-SL13R-xx Ultra3 (LVD)
DS-SL13R-xx Ultra3 (LVD)
Shelves
Shelves
Shelves
Shelves
Each single-bus Ultra3 shelf requires a 3X-KZPCA-AA Ultra2 (LVD) SCSI adapter or DS-KZPCC-
xx RAID controller and a SCSI cable to connect controller to shelf
Each split-bus Ultra3 shelf requires two 3X-KZPCA-AA Ultra2 (LVD) SCSI adapters, at least one
dual-channel 3X-KZPEA-DB Ultra3 (LVD) SCSI adapter, or DS-KZPCC-xx RAID controllers and
SCSI cables to connect controller to shelf
Ultra3 shelves connected to 3X-KZPCA-AA adapters in the power cabinet require BN38C-02
2-meter cables; DS-KZPCC-xx RAID controllers require BN37A-02 2-meter cables.
Ultra3 shelves connected to 3X-KZPCA-AA adapters in an attached expander cabinet require
BN38C-10 10-meter cables; DS-KZPCC-xx RAID controllers require BN37A-10 10-meter
cables.
Ultra3 shelves connected to 3X-KZPCA-AA adapters in a remote expander cabinet require 10
20-meter BN38C-xx cables, depending upon physical cabinet location; DS-KZPCC-xx RAID
controllers require BN37A-xx cables.
Ultra3 Universal drives are listed in a subsequent section
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf,
International except Japan
DS-SL13R-AA
StorageWorks Model 4314R Ultra3 SCSI (LVD) single-bus Universal drive rackmount shelf, Japan
DS-SL13R-AJ
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, International
except Japan
DS-SL13R-BA
StorageWorks Model 4354R Ultra3 SCSI (LVD) split-bus Universal drive rackmount shelf, Japan
DS-SL13R-BJ
NOTE:
NOTE:
NOTE:
NOTE: Model 4314 shelf with DS-KZPCC-CE RAID controller does not support a disk drive in the last slot.
QuickSpecs
HP AlphaServer GS320 (1224 MHz)
Options
DA - 11424 North America — Version 7 — August 19, 2003
Page 11