Harbor Freight Tools 98089 - Manual (Page 26)

SKU 98089 For technical questions, please call 1-800-444-3353 PAGE 26
4. Coverage exclusions
Warranty claims shall be filed in accordance with the provi-
sions of the HFT warranty policy explained in the box at the
top of the previous page. HFT shall not be liable for any loss
of use of the engine, for any alternative usage, for any damage
to goods, loss of time, or inconvenience. Warranty coverage
shall also be excluded for any part which fails, malfunctions,
or is damaged due to failure to follow the maintenance and
operating instructions set forth in the Owner’s Manual includ-
ing, but not limited to:
(a) use of parts which are not authorized by HFT
(b) improper installation, adjustment or repair of the engine
or of any warranted part unless performed by an autho-
rized warranty center
(c) failure to follow recommendations on fuel use contained
in the Owner’s Manual
(d) improper or inadequate maintenance of any warranted
parts
(e) repairs performed outside of the authorized warranty
service dealers
(f) alterations by changing, adding to or removing parts from
the engine.
5. Service and maintenance
Component parts which are not scheduled for replacement
as required maintenance or are scheduled only for regular
inspection to the effect of “repair or replace as necessary”
are warranted for the warranty period. Any warranted part
which is scheduled for replacement as required maintenance
is warranted for the period of time up to the first scheduled
replacement point for that part. Any replacement part, pro-
vided it is equivalent in durability and performance, may be
used in performance of maintenance or repairs. The owner
is responsible for commissioning a qualified technician/me-
chanic to perform all required maintenance, as outlined in the
inspection, Cleaning, and maintenance section on page
14 of this manual.
6. Warranted Parts
1) Fuel metering System
i) Carburetor and its internal parts.
ii) Fuel pump (if so equipped).
iii) Cold start enrichment system.
2) air induction System
i) Intake pipe/manifold.
ii) Air cleaner.
3) ignition System
i) Spark plug.
ii) Magneto ignition system.
4) Catalyst System (if so equipped)
i) Exhaust pipe stud.
ii) Muffler.
iii) Catalytic converter (if so equipped).
5) miscellaneous items used in above Systems
i) Vacuum, temperature and time sensitive valves and
switches.
ii) Hoses, belts, connectors, and assemblies.