Hawking Technology HWR54G User Manual

Page 61

Advanced Features

This address should be static, rather than dynamic, to make it easier for Internet users to
connect to your Servers.
However, you can use the DDNS (Dynamic DNS) feature to allow users to connect to your
Virtual Servers using a URL, instead of an IP Address.

Virtual Servers Screen

The Virtual Servers screen is reached by the Virtual Servers link on the Advanced screen. An
example screen is shown below.

Figure 36: Virtual Servers Screen

This screen lists a number of pre-defined Servers, and allows you to define your own Servers.
Details of the selected Server are shown in the "Properties" area.

Data - Virtual Servers Screen

Servers

This lists a number of pre-defined Servers, plus any Servers you
have defined. Details of the selected Server are shown in the
"Properties" area.

Properties

Enable

Use this to Enable or Disable support for this Server, as required.
• If Enabled, any incoming connections will be forwarded to the

selected PC.

• If Disabled, any incoming connection attempts will be blocked.

PC (Server)

Select the PC for this Server. The PC must be running the appro-
priate Server software.

Protocol

Select the protocol (TCP or UDP) used by the Server.