Wireless station configuration – Hawking Technology HWR54G User Manual

Page 37

PC Configuration

Wireless Station Configuration

This section applies to all Wireless stations wishing to use the Wireless Router's Access Point,
regardless of the operating system which is used on the client.

To use the Wireless Access Point in the Wireless Router, each Wireless Station must have
compatible settings, as follows:

Mode

The mode must be set to Infrastructure.

SSID (ESSID)

This must match the value used on the Wireless Router. The default
value is default

Note! The SSID is case sensitive.

WEP

By default, WEP on the Wireless Router is disabled.
• If WEP remains disabled on the Wireless Router, all stations must

have WEP disabled.

• If WEP is enabled on the Wireless Router, each station must use the

same settings as the Wireless Router.

Note that the Wireless Router will automatically accept both 802.11b and 802.11g connec-
tions, and no configuration is required for this feature.