Installation, Chapter 2 – Hawking Technology HWR54G User Manual
Page 10
6
Chapter 2
Installation
This Chapter covers the physical installation of the Wireless Router.
Requirements
• Network cables. Use standard 10/100BaseT network (UTP) cables with RJ45 connectors.
• The TCP/IP protocol must be installed on all PCs.
• For Internet Access, an Internet Access account with an ISP is required (most commonly
with a DSL or Cable modem provider)
• To use the Wireless Access Point, all Wireless devices must be compliant with the
IEEE802.11g specifications.
Procedure
Figure 3: Installation Diagram
1. Choose an Installation Site
Select a suitable place on the network to install the Wireless Router.
Ensure the Wireless Router and the DSL/Cable modem are powered OFF.