Operating instructions, Special operating instructions – Holder C-Trac C 9700 User Manual
Page 84

Operating Instructions
145 052
83
C 9700 ... C 9.88 H
Special Operating Instructions
1
1
Bild_089
V
2
3
R
Operating the Emergency Start (Hydrostatic Drive
with Dual-Drive Only)
NOTE
In case the engine was stalled and can not be
started again, the emergency start must be
operated before a renewed starting attempt.
-
Fully depress the inch pedal.
-
Briefly operate the starter.
-
Pull the handle for the emergency start (1) up.
-
Start the engine again.
Operating the Emergency Shift (Mechanical Gearbox
Only)
NOTE
In the event of a failure of the electrical
installation, it is possible to drive to an authorized
workshop with the emergency shift.
-
Turn off the engine.
-
Apply the parking brake
-
Put the range selector lever and the gearshift lever in
neutral
-
Remove the wire safety (3).
-
Carefully press the ball socket of the servo motor (2)
down until it is disconnected.
-
Move the operating lever (1) to the desired position. V
= forwards or R = reverse.
-
Start the engine and drive to the workshop.