Holder C-Trac C 9700 - Manual (Page 73)

C 9700 ... C 9.88 H
Operating Instructions
72 145 052
Operation
- Set the program switch (2) to driving range 2.
ATTENTION
Drive the tractor warm for approx. 10-12 min.
at driving range 2.
- Set the program switch to driving range 1.
NOTE
The functions of the drive are same except
for the overdrive:
When the driving speed* exceeds 25 km/h,
the transmission automatically shifts from the
hydrostatic drive to the mechanical gear.
If the driving speed drops again, the
transmission shifts back to the hydrostatic
drive.
* Depending on the version
Bild_192
2