Holder C-Trac C 9700 - Manual (Page 164)

Operating Instructions
145 052 163
C 9700 ... C 9.88 H
Maintenance as Required
Adjusting the Speedometer
The adjustment of the speedometer in the multi-function
display is required when changing from large to smaller tires
and vice versa.
-
Remove the sun protection frame (1).
- Disengage the lock on the left (2) and right (3) side of
the frame with a screwdriver.
- Pull the multi-function display (4) out and turn it
around.
- Remove the cover from the combination switch (5) on
the back.
- Set the 6 DIP switches to the positions shown in the
table as required for the size of your tires.
- Note the combinations column applicable for your
display.
NOTE
There are 2 different columns for the possible
combinations. The first column applies for the
tractor with gearbox, the second one for the
Hydrostatic Drive and Dual Drive.
Bild_146
1
3
4
2
Bild_147
5