Humminbird 300 SERIES 365I - Manual (Page 39)

29
V Viie ew w O Orriie en ntta attiio on n
Both Chart and Combo Views allow you to choose the orientation of the view
(see Navigation Menu Tab: Chart Orientation). In both orientations, the view
pans automatically so that the boat is always centered on the display.
• North-Up: True North is shown at the top of the display. Objects located
to the north of the boat are drawn above the boat.
• Course-Up: The direction of motion of the boat is shown at the top of the
display. Objects ahead of the boat are drawn above the boat.
When the boat is stationary, it is drawn as a circle. When the boat is in motion,
it takes on a boat shape, pointed in the direction of motion (always Up in the
Course-Up orientation).
V Viie ew wiin ng g C Ca arrtto og grra ap ph hyy
In the Chart or Combo Views there are several cartography-related functions
that you can access using various keys.
Panning: Use the 4-WAY Cursor Control
key to move the chart around on the
display in the direction of the key being
pressed. When you do this, a bull's eye
cursor is drawn at the center of the screen
and is linked to the boat by a gray line, even
if the boat is off the screen. At the same
time, the temperature and speed boxes in
the lower left corner are replaced with the
distance and bearing from the boat to the
cursor position and the latitude/longitude
coordinates of the cursor.
Chart View with Cursor Present,
shown with Optional-Purchase
Navionics® Cartography
Views