Humminbird 300 SERIES 365I User Manual

Page 32

orrd

diin

g a

d P

Plla

ayyb

The Recording feature records active sonar information. When the recording is
played back, the views that were active during the recording are available in
Playback. The Recording and Playback feature is available when an optional-
purchase MMC/SD card is installed and Screen Snapshot is On (see Setup
Menu Tab, Screen Snapshot). Saved Recordings can be played back from the
Snapshot and Recording View.

Start recording:

1. From

the

Snapshot

and

Recording View, press the MENU
key once to open the Snapshot
and Recording X-Press™ Menu.

2. Highlight Start Recording, and

press the RIGHT Cursor key. A
waypoint will also be created at
the boat location, and the
recording shares the same file
name (.SON).

Stop recording:

1. In any view, press the MENU key

once to open the Snapshot and
Recording X-Press™ Menu.

2. Highlight Stop Recording and

press the RIGHT Cursor key.

Notes about Recording:

• While recording, press the EXIT key to exit the Snapshot and Recording

X-Press™ Menu and scroll to a different view. Recording will continue.

• The slider bar at the bottom of the Snapshot and Recording View shows

the recording progress and remaining space on the MMC/SD card.

• Pings Per Second: For maximum performance, keep the Pings Per

Second setting on Auto (see Snapshot and Recording X-Press™ Menu).

• Viewing saved Screen Snapshots and Recording Playback are not

available while in recording mode.

Start a Recording

From Snapshot
and Recording
View, select
Start Recording
from the
X-Press™ Menu.

Slider Bar

Views