Setting the wake up times – Emerson Radio CKD1137 User Manual

Page 11

Setting The Wake Up Times

The unit has two separate wake up alarms that can be set and used independently.

1.) Press the ALARM 1 or ALARM 2 button once. The display will change from

the respective time of the day to wake up time and begin flashing.

The AL. 1 or AL. 2 indicator comes ‘On’.

2.) Press the

HR. button to set the wake

up hour. Set correctly for AM or PM.

Press the

MIN. button to set the minute

correctly.

3.) Press the respective ALARM button once.

The Alarm time is set.

The display returns to correct time.

Notes:

• After you press the ALARM 1 or ALARM 2 button, you must press the

HR. or

MIN. buttons to adjust the alarm time within 5 seconds, while the

alarm display is still flashing. After 5 seconds the alarm time stops flashing

and the display returns to the correct time. If this occurs, press the desired

Alarm button again until the alarm time display begins flashing and make

your alarm time adjustments while the display is flashing.

• After you have adjusted the wake-up time the alarm is set automatically.

The AL1 and/or AL2 indicators will be ‘On’. To deactivate the alarms press

the ALARM 1 and/or ALARM 2 buttons once. The AL1 and/or AL2 indicators

will go ‘Off’.

REPEAT

PROGRAM

RANDOM

POWER

FM ST.

AL. 2

AL. 1