Emerson Radio CKD1137 - Manual (Page 10)

9
OPERATING INSTRUCTIONS
Setting The Time Of Day
• Connect the power cord to your AC outlet. Make sure to use an outlet that is
always ‘live’. Do not use an outlet that is controlled by a wall switch.
• When the unit is plugged in for the first time
the display will show flashing “12:00” (AM).
1.) While the display is ‘flashing’, press the HR. button to set the hour. Be
sure to observe the PM indicator to set the hour correctly. If the PM indicator
is ‘On’ the hour displayed is PM.
2.) Press MIN. button to set the minute correctly..
3.) Press the STOP/TIME button once, the
time is set. The display remains ‘On’.
Note: You may proceed to re-set the time again by pressing the STOP/
TIME button once during Power-off, FM or AM modes.
Important Notes !!
If you press and hold the STOP/TIME button any time, (except CD mode),
the clock will change to European 24-Hour format, and vice versa.
REPEAT PROGRAM RANDOM POWER FM ST.
AL. 2 AL. 1
PM
REPEAT PROGRAM RANDOM POWER FM ST.
AL. 2 AL. 1
PM
REPEAT PROGRAM RANDOM POWER FM ST.
AL. 2 AL. 1
PM
REPEAT PROGRAM RANDOM POWER FM ST.
AL. 2 AL. 1
PM
CKD1137_053105.p65 1/6/2005, 14:22 9