Emerson Radio ES2 - Manual (Page 9)

8
Installing The Remote Control Batteries
At the back of the remote, press the indented area and slide open the battery
compartment.
Insert 2 ‘AAA’ batteries (not included). Make sure the polarity of the batteries is as
shown above.
Once the batteries are inserted, slide the battery compartment closed.
If the remote stops working, it's most likely that the batteries need replacing. Always
use Alkaline batteries for longest life and best performance.
Dispose of old batteries safely. Do not throw them into a fire.
If you're not using the remote for a few weeks or more, remove the batteries.
Note:
Most functions can be operated by the remote. However, some of the controls are
also present on the touch panel.
!
ES2_ib041503.p65 15/4/2003, 9:36 8