Emerson Radio ES2 - Manual (Page 25)

24
Alarm Operation
This system also includes an alarm function that can be used to wake you up to the
TUNER, the CD player, or an electronic BUZZER tone.
IMPORTANT:
When setting the wake up time, and wake up mode, you must make each adjustment
while the ALARM indicator is flashing in the display. If the ALARM indicator stops
flashing/disappears the alarm setting mode is canceled and your settings will not be
entered in the memory.
Set the alarm time as follows:
1. If you wish to wake to Tuner, tune to the desired station and adjust the VOLUME
and EQ controls to the desired levels. If you wish to wake to CD, insert the
desired disc in the player. (You may also program the player to play one or more
specific tracks if desired.)
2. Press the REMAIN/MODE button repeatedly until the ALARM indicator is flashing
on the right side of the display. One of the alarm modes (TUNER, CD, or BUZZER)
will also be flashing.
3. While the ALARM indicator is flashing immediately press the MEMORY (PROG)/
CLOCK ADJ. button. The Hour digits begin to flash.
AM ALARM
TUNER
AM
TUNER
ALARM
ES2_ib041503.p65 15/4/2003, 9:36 24