Emerson Radio ES2 - Manual (Page 23)

22
3. Press the MEMORY (PROG) button immediately to store the station, or within 5
seconds the MEMORY and CHANNEL indicators stop flashing and the station
that appears on the display is now automatically stored in the Channel (Memory)
number that you selected.
Note: After pressing the MEMORY (PROG) button the first time you must select a
Channel number within 5 seconds, while the MEMORY indicator is flashing, or the
station will not be memorized.
Recalling Stations In Memory
1. Press TUNER (BAND) button to select the Tuner mode and press again to select
the desired band if necessary.
2. Press the CHANNEL UP (REPEAT) or CHANNEL DOWN (RANDOM) buttons
to select the desired Channel/Memory number.
You can also recall stored stations by pressing the appropriate number keys on the
remote handset as follows:
1. For channel memories 1 through 9 press the corresponding number key.
2. For channels 10 through 20 press the "--" key first and then the corresponding 2
number keys.
Example: For channel memory number 20, press the "--" key and then the "2"
and "0" keys.
ES2_ib041503.p65 15/4/2003, 9:36 22