Epson 8000i - Manual (Page 64)

1 • Setting Up the Projector 54
To connect a video source to the projector:
1. Turn off the projector and video source if they are on.
2. If your video source uses a small, round, one-prong composite
(RCA) video connector, you’ll need the RCA video cable that
comes with the projector. If your video source uses a large, round,
four-prong S-Video connector or a BNC type connector, you will
need to purchase the appropriate cable or use the cable that came
with your video source.
3. For composite video, connect the yellow RCA plug on one end of
the RCA video cable to the projector’s Video port. Connect the
other yellow RCA plug to the video-out port of your video source.
audio/video cable
80009000.book Page 54 Monday, November 1, 1999 9:35 AM