Epson 8000i User Manual

Page 42

Text mode
Original mode

1 • Setting Up the Projector

4. To use the ELP Link IV software, or to program new effects for

the Effects buttons on the remote control, connect one end of the
serial cable to the SERIAL terminal on the square end of the main
cable.

5. Connect the other end of the serial cable to the serial port on the

back of your computer.

Note: You will not be able to use ELP Link IV if your laptop has only
one serial port that is being used to support a serial mouse.

6. Configure your laptop to work with an external mouse.

Note: You may have to set the display to appear on both the laptop’s
screen and the projector. Some laptops let you change this setting with
the keyboard’s function keys or by using a setup utility provided by the
computer manufacturer. Check your laptop’s manual or online help
for instructions.

80009000.book Page 32 Monday, November 1, 1999 9:35 AM