Emerson Radio CKD2300 - Manual (Page 7)

6
AC Plug
AC Outlet
Power Source
This radio is designed to operate on 120V 60Hz AC only. Attempting to operate
this radio on any other power source could cause damage to the unit and such
damage is not covered by your warranty.
Make sure the radio is connected to an AC outlet that is always “live”. Do not
connect the radio to an outlet that is controlled by a wall switch.
Note: The system has polarized AC plug with one wide blade and one narrow
blade. The plug will only fit into matching polarized AC outlets.
This is a safety feature to reduce the possibility of electric shock. If the plug will not
fit in your AC outlet, you probably have an outdated non-polarized outlet. You should
have your outdated outlet changed by a qualified, licensed electrician.
Do not file the wide blade on the plug, or
use an adapter to make the plug fit into
your outlet. This defeats the safety
feature and could expose you to electric
shock.
Protect Your Furniture
This model is equipped with non-skid rubber 'feet' to prevent the product from
moving when you operate the controls. These 'feet' are made from non-migrating
rubber material specially formulated to avoid leaving any marks or stains on your
furniture. However certain types of oil based furniture polishes, wood preservatives,
or cleaning sprays may cause the rubber 'feet' to soften, and leave marks or a
rubber residue on the furniture. To prevent any damage to your furniture we strongly
recommend that you purchase small self-adhesive felt pads, available at hardware
stores and home improvement centers everywhere, and apply these pads to the
bottom of the rubber 'feet' before you place the product on fine wooden furniture.
CKD2300_060305.p65 3/6/2005, 11:04 6