Extreme Networks Px Series - Manual (Page 54)

5-4 Px Series Application Switch Installation and Configuration Guide
You can assign a specific VLAN tag to a virtual service. VLAN tags for services are
optional for the SummitPx1, but required on the PxM. To assign a VLAN tag to a
service, use the following command:
config service vip vlan port
protocol [tcp|udp] [L4|L7] server-group-name
Layer 4 Port-based Load Balancing
A layer 4 service does not examine traffic and make decisions based on cookies or
URLs. Layer 4 virtual services include the virtual IP address (VIP), the IP port of the
service, the protocol (
tcp or udp ), and the name of the server group to use.
Define layer 4 services with the following command:
config service vip port protocol [tcp|udp]
L4 server-group-name
You can configure a layer 4 service on a VLAN, using the optional vlan argument:
config service vip vlan port
protocol [tcp|udp] L4
Layer 7 Virtual Services
Layer 7 virtual services require a more complex configuration, because they must
include information about what domains, URLs, and cookies should be processed. Use
the following commands to configure layer 7 virtual services:
config service vip port proto [tcp|udp] L7
class [http | https]
The class of application that the VIP supports is either http for regular web traffic,
or https for SSL session persistence. You can also specify a VLAN using the
optional vlan argument.
config domain name
Domain names refer to the DNS domains that are used at the service. Domains are
always required. If you use only the URL to make your server selection, use the
special domain name
domain* .